Button Instruction - TECPEL DCM-043 Instruction Manual

Current Sensing Clamp
○
1
Safety protection ring
○
2
Clamp opening handle
○
3
LCD display
○
4
COM input terminal
○
5

Button Instruction:

Zero Button
Press Zero button to enter the Zero mode, "
will appear and Zero the display. The reading is stored as
reference value for subsequent measurement.
Press the Zero button again, to exit the zero mode.
Data Hold & Peak Hold Button
To activate the Data Hold feature, press and hold the
" Hold " button.
To de-activate the Data Hold feature, press and hold the
" Hold " button again.
To activate the Peak Hold feature, press and hold the
" Peak " button until the symbol displays.
To deactivate the Peak feature, press and hold the " Peak "
button for 2 seconds.
The meter will return to normal mode operation.
Note: This meter is built with peak hold function at ACA,
DCA, ACV, DCV ranges.
Disable Auto power off
Press and hold " ZERO " button and then the power on the
meter, the
○
6
○
7
○
8
○
9
symbol will disappear.
5
Instruction Manual
Positive input terminal
Function select dial
Peak / Data hold button
Zero button
△
" Annunciate