General Measure Checkweigher User Manual page 37

not touch the floor, adjust the nut to make the foot screw touch floor reliably.
(1) Check whether the device is aligned horizontally.
(3) Check whether the motor wire is fixed, avoiding the wire hang in the air.
(4) Check whether there is object contact the platform and remove it if there is.
2. If it doesn't display weigh result when product pass through the weighing platform,
check as follows:
（1）Check whether the device has been started, if not, start it.
（2）Check whether the light source and light barrier align, if not, the device
cannot start work. Realign the light source and light barrier.
（3） Check whether product parameters are correctly set. If not, the checkweigher
cannot work normally.
Checkweigher user's manual
34