General Measure Checkweigher User Manual page 23

Product name.
"Nominal weight"
Weight of the product expected to be.
"Upper deviation"
When the weighing result > nominal weight + upper deviation, the checking
result is over.
"Lower deviation"
When the weighing result < nominal weight – lower deviation, the checking
result is under.
"Throughput"
Quantity of product checked per minute.
"Tare"
Weight of the product package material, display result = weighing result – tare.
Press <Next>
Enter second page of product parameter, as Fig 6-14.
Input length of the product correctly.
Length is the maximum dimension in motion direction.
Press <Next>.
Enter third page of product parameter, in this page, you can input the
parameters which are used to control the rejector.
Fig 6-14 Product parameter 2
Checkweigher user's manual
20