Table of Contents
Advertisement
6.2.3.3 Velocity calibration
Press <Velocity calib> in advanced maintenance interface.
Enter velocity calibration interface, as Fig 6-27.
According to the belt speed range, determine three point speed and line velocity,
input the three speeds sequentially in the input box under input motor, measure the
corresponding line velocity, and record the speed and line velocity in the right.
Repeat the operation for the weighing belt and output belt.
Fig 6-27 Velocity calibration interface
Fig 6-28 Input belt calibration interface
Checkweigher user's manual
29
Advertisement
Table of Contents
Need help?
Do you have a question about the Checkweigher and is the answer not in the manual?
Questions and answers