Logon And Logoff - General Measure Checkweigher User Manual

Input data according to the data description.
The data description "Float: Product identity [1-50]" means the parameter is
"Product identity" and its input range is 1 to 50.
Press <OK> to confirm entered data or press <Cancel> to cancel and exit

Logon and logoff

Checkweigher has four user levels, the default level is no log, which can only
start the device to check one kind of product whose parameter has been set correctly
and selected. If you need to check more than one kind of product, you need to logon
with operator account. If product management or system maintenance need to be
carried out, logon with technician account will be requested. Steps of logon are as
follow:
Press <User> in main interface.
Enter user interface, as Fig 6-3.
Press <Logon> .
Pop up log on dialog box.
Fig 6-2 Input box
Fig 6-3 User interface
Checkweigher user's manual
14