Ftp/Ssl; Change User Info For Ftp Login; Select Ssl Certificates - Panasonic Web-server II Operating Instructions Manual

Panasonic Electric Works Nordic AB
MEW01228 Rev: 1
5.9
5.9.1
5.9.2
Operating Instructions Web512 V2.6.x for Web-server II 1598

FTP/SSL

Change user info for FTP login

When the Web-server II shall be configured (programmed) via the PC
program Web512 II Config tool, this is done via a Local Area
Network LAN (or a crossed network cable or a hub). For safety
reasons User name and Password are used. Both are ftp as default and
could be changed via Web512 II Config tool.
New user name: Type the new name.
New password: Type the new password.
displayed.)
Confirm password: Type the new password. (Only dots will be
displayed.)
NOTE! The new User name and Password are not valid until after
download to the Web-server II and restart of the Web-server II.

Select SSL Certificates

When the Web-server II shall be used also for control of the EBL512
system, it is highly recommended to use the safe (encrypted)
communication.
Use SSL access: Select this option to create a safe (encrypted)
communication with the EBL512 system. If so, three files have to be
downloaded (see below).
Panasonic Electric Works
name: SSL Certificate for Web-server.
CA certificate: Type the path and file name (e.g. intermed.pem) or
use the Browse button.
Key file: Type the path and file name (e.g. privkey.pem) or use the
Browse button.
Server certificate: Type the path and file name (e.g. cert.pem) or use
the Browse button.
These files have to be ordered from
Nordic AB. Article no. 1599. Product
56
(Only dots will be