Status; Control Unit - Panasonic Web-server II Operating Instructions Manual

Panasonic Electric Works Nordic AB
MEW01228 Rev: 1
4.4
4.4.1
Operating Instructions Web512 V2.6.x for Web-server II 1598

Status

After log in
or
In any other view click Status or Summary to see the Status –
Summary view.
Depending on the log in User level (which is depending on User
name and Password), different buttons can be used, which give
access to remote control and information or information only.
The page is continuously updated (approx. each 10
In case of inconsistency between the Web-server II and the EBL512
system a synchronization has to be done via EBL512 (menu H8/S10).
See also chapter "Synchronize", page 34. After restart of the Web-
server II is always a synchronization done (automatically).
Regarding User name and Password, see chapter "Functions", page 9.
User level 1 is for presentation of the actual EBL512 status only.
The user can, after log in on User level 1, view the
information shown above.
The different Items and Values (number of alarms etc.) as well as
each button are described on the following pages.

Control unit

Click Control Unit to open the Status – Control Unit view:
Sync. Status, see chapter "Synchronize", page 34.
2
If more than one EBL512 are available the synchronization can be done via
Win512 (the PC with Win512 can be connected to one EBL512 c.i.e. and the
Web-server II to another).
12
th
sec.).
2
Status – Summary