Gfbp Output; Control Unit Loop (Com Loop 0-3.); Loop Unit Loop (Loop Unit, Zone Line Input.); Det8 Loop (Det8 Zone Line Input 0-7) - Panasonic Web-server II Operating Instructions Manual

Panasonic Electric Works Nordic AB
MEW01228 Rev: 1
4.6.9
4.6.10
4.6.11
4.6.12
Operating Instructions Web512 V2.6.x for Web-server II 1598
Click ReEnable to re-enable the disablement respectively. (Require
log-in on User level 2 or higher.)
If the list is "full" click Next to see the next list and Prev to see
previous list.
Click Summary to return to the Disablement – Summary view.

GFBP Output

Click List to view the Disablement list – GFBP Output view / list.
Click ReEnable to re-enable the disablement respectively. (Require
log-in on User level 2 or higher.)
If the list is "full" click Next to see the next list and Prev to see
previous list.
Click Summary to return to the Disablement – Summary view.

Control Unit Loop (COM loop 0-3.)

Click List to view the Disablement list – Control Unit Loop view /
list.
Click ReEnable to re-enable the disablement respectively. (Require
log-in on User level 2 or higher.)
If the list is "full" click Next to see the next list and Prev to see
previous list.
Click Summary to return to the Disablement – Summary view.

Loop unit Loop (Loop unit, zone line input.)

Click List to view the Disablement list – Loop Unit Loop view / list.
Click ReEnable to re-enable the disablement respectively. (Require
log-in on User level 2 or higher.)
If the list is "full" click Next to see the next list and Prev to see
previous list.
Click Summary to return to the Disablement – Summary view.

DET8 Loop (DET8 zone line input 0-7).

Click List to view the Disablement list – DET8 Loop view / list.
ReEnable
ReEnable
20