Royal Enfield Super Meteor 650 Owner's Manual page 47

OPERATION OF CONTROLS (If fitted)
NOTE
After every Ignition "ON" cycle tripper will be in
discoverable mode for 120 seconds.
Incase there is no connection established within
120 seconds. Display will enter into clock mode, to
reinitiate connection ignition "OFF-ON" cycle to be
repeated.
During navigation mode if there is no input from
smartphone for 5 seconds, bluetooth connection
will be terminated to avoid power draw and will
display clock.
Bluetooth connection can be terminated by end
user also by closing the mobile application.
For first time pairing user needs to enter the
secured pin shown on tripper through RE Mobile
app to setup the device, after that auto-pairing will
happen if same device is connected.
Every time the tripper is paired the clock time will
sync with mobile time after which it will continue to
run with internal clock even in case of disconnection,
there will be time difference between time shown
on instrument cluster and tripper - customer needs
to update cluster clock in line with time shown on
tripper as and when required as mentioned in push
button management of cluster.
Do not apply or use gasoline / petrol related fluids
for cleaning or wiping on instrument cluster or
tripper, as it may result in permanent damage to
the same.
Royal Enfield Super Meteor 650
45