Royal Enfield Super Meteor 650 Owner's Manual page 76

MINOR MAINTENANCE TIPS
Remove the nut and
washer from the wheel
spindle.
Push rear wheel fully into
the swing arm.
Support rear wheel from
bottom and pull out wheel
spindle from the left side
swing arm.
Release the brake hose
gently and remove caliper
assembly from swing arm
on right side.
CAUTION
Ensure brake hose does not
get damaged or kinked while
removing.
Support caliper assembly suitably and away from
swing arm.
74 Royal Enfield Super Meteor 650
Release the chain from the
sprocket and ensure it does
not get jammed or damaged
when removing rear wheel.
Remove support from
wheel bottom and gently
slide out rear wheel from
the swing arm with rear sprocket, brake disc
and spacers.
CAUTION
Do not press the rear brake pedal when the rear
wheel is being removed as this will cause the brake
pads to dislocate from the brake caliper.
Place a 4 mm thick wooden piece or cardboard
sheet between the brake pads to avoid
activation of brake pads if rear brake pedal is
accidentally pressed.
LH RH