Royal Enfield Super Meteor 650 Owner's Manual page 74

MINOR MAINTENANCE TIPS
FRONT WHEEL ASSEMBLY
Remove the wooden piece
/ cardboard sheet placed
between the brake pads.
Locate spacer to the
wheel hub on both LH and
RH side.
Insert the wheel along
with spacers between
the fork ends. Ensure
the brake disc is located
between the brake pads.
Support the wheel at a
height that the spindle can
be fitted through the fork
legs and wheel. Insert the
spindle from the LHS and
push until the threads of
the spindle engage with
those of the RHS fork leg
then screw spindle until
fully seated.
72 Royal Enfield Super Meteor 650
CAUTION
RH LH
Tighten spindle bolt firmly
on LH side to a torque of
65 Nm.
Tighten fork clamp bolt
firmly on LH side to a torque
of 23 Nm.
Rotate wheel to check for
smooth rotation.
Press brake lever and check front brake efficiency.
Please exercise utmost caution while
reassembling the front wheel on the
motorcycle.
Please ensure the wheel is fitted correctly
before attempting to ride the motorcycle.
Failure to do so may result in the motorcycle
not performing correctly, may lead to an
accident causing injury to you / other road users
and may lead to loss of life.