Juniper T4000 Quick Start Manual page 34

T4000 Core Router Quick Start
34
file interactive-commands {
interactive-commands any;
}
}
}
routing-options {
static {
/* corporate office */
route 172.16.0.0/12 {
next-hop 192.168.71.254;
retain;
no-readvertise;
}
}
}
Commit the configuration to activate it, and synchronize the configuration. The
2.
synchronize command commits this new configuration on both Routing Engines
simultaneously.
[edit]
root# commit synchronize
re0:
configuration check succeeds
re1:
commit complete
re0:
commit complete
If you receive an error message after you issue the
the configuration using the
You can delete incorrect entries using the
hostname from the configuration, issue the following command:
[edit]
root# delete system host-name hostname
Optionally, configure additional properties by adding the necessary configuration
3.
statements. Then commit the changes to activate them.
[edit]
root@host# commit synchronize
Exit configuration mode.
4.
[edit]
root@host# exit
Exiting configuration mode
root>
commit
show command to find the errors in your configuration.
command. For example, to delete a
delete
Copyright © 2012, Juniper Networks, Inc.
commit
statement, you can review