Juniper T4000 Quick Start Manual page 23

Copyright © 2012, Juniper Networks, Inc.
Plug one end of the Ethernet cable
3.
the appropriate
ETHERNET
labeled connect to the Routing Engine in the upper Routing Engine slot (
HOST 0
and the ports labeled HOST 1
Engine slot ( ).
RE1
Plug the other end of the cable into the network device.
4.
Figure 12: Routing Engine Ethernet Cable Connector
Figure 13: ETHERNET Port on the CIP
Connecting to a Network for Out-of-Band Management
(Figure 12 on page 23
port on the CIP (see Figure 13 on page
connect to the Routing Engine in the lower Routing
T Ser ies
FANTR AY-T40 00
FAN TR
AY- T40
00
shows the connector) into
23). The ports
RE0
23
),