Juniper T4000 Quick Start Manual page 17

Core router

Hide thumbs Also See for T4000:

Table of Contents

With two people in the front and two people in the back, hold the bottom of the chassis

and carefully lift it onto the large and small (if installed) mounting shelves.

With one person pulling on the installation handle from the back of the rack or cabinet

while two people push on the front-mounting flanges, slide the router onto the

mounting shelf or shelves:

Four-post rack or cabinet: Slide the router onto the mounting shelves until the

front-mounting flanges contact the spacer bars.

Front-mounting in an open-frame rack: Slide the router onto the large mounting

shelf until the front-mounting flanges contact the rack rails.

Center-mounting in an open-frame rack: Slide the router onto the large mounting

shelf until the center-mounting brackets contact the rack rails.

Install the mounting screws:

Four-post rack or cabinet: Install a mounting screw into each of the holes aligned

with the threaded holes in the spacer bars.

Open-frame rack: Install a mounting screw into each of the open mounting holes

aligned with the rack, starting from the bottom.

Lifting the Router into the Rack

Table of Contents