Mcx654106A-Ecat Specifications - Nvidia ConnectX-6 User Manual

Airflow (LFM) /
Ambient
Temperature
Regulatory
Safety: CB / cTUVus / CE
EMC: CE / FCC / VCCI / ICES / RCM// KC
RoHS: RoHS Compliant
Notes: a. The ConnectX-6 adapters supplement the IBTA auto-negotiation specification to get better
bit error rates and longer cable reaches. This supplemental feature only initiates when connected to
another NVIDIA InfiniBand product.
b. Typical power for ATIS traffic load.
c. For both operational and non-operational states.

MCX654106A-ECAT Specifications


Please make sure to install the ConnectX-6 card in a PCIe slot that is capable of supplying
the required power and airflow as stated in the below table.
Physical
Adapter Card Size: 6.6 in. x 2.71 in. (167.65mm x 68.90mm)
Auxiliary PCIe Connection Card Size: 5.09 in. x 2.32 in. (129.30mm x 59.00mm)
Two Cabline CA-II Plus harnesses (white and black) Length: 35cm
Connector: Dual QSFP56 InfiniBand and Ethernet (copper and optical)
Protocol
InfiniBand: IBTA v1.4
Support
Auto-Negotiation: 1X/2X/4X SDR (2.5Gb/s per lane), DDR (5Gb/s per lane), QDR (10Gb/s
per lane), FDR10 (10.3125Gb/s per lane), FDR (14.0625Gb/s per lane), EDR (25Gb/s per
lane) port, HDR100 (2 lane x 50Gb/s per lane)
Cable Type
Passive Cables
NVIDIA Active 4.7W Cables
a
Airflow Direction
Heatsink to Port
700 LFM / 55°C
1050 LFM / 55°C
600 LFM / 48°C
Port
to
Heat
sink
400
LFM /
35°C
400
LFM /
35°C
93