Mcx653106A-Ecat Specifications - Nvidia ConnectX-6 User Manual

Notes: a. The ConnectX-6 adapters supplement the IBTA auto-negotiation specification to get better
bit error rates and longer cable reaches. This supplemental feature only initiates when connected to
another NVIDIA InfiniBand product.
b. Typical power for ATIS traffic load.
c. For both operational and non-operational states.

MCX653106A-ECAT Specifications


Please make sure to install the ConnectX-6 card in a PCIe slot that is capable of supplying
the required power and airflow as stated in the below table.

For power specifications when using a single-port configuration, please refer to
MCX653105A-ECAT Specifications
Physic
Adapter Card Size: 6.6 in. x 2.71 in. (167.65mm x 68.90mm)
al
Connector: Dual QSFP56 InfiniBand and Ethernet (copper and optical)
Protoc
InfiniBand: IBTA v1.4
ol
Suppo
Auto-Negotiation: 1X/2X/4X SDR (2.5Gb/s per lane), DDR (5Gb/s per lane), QDR (10Gb/s per lane),
rt
FDR10 (10.3125Gb/s per lane), FDR (14.0625Gb/s per lane), EDR (25Gb/s per lane) port, HDR100 (2
lane x 50Gb/s per lane) port
Ethernet: 100GBASE-CR4, 100GBASE-KR4, 100GBASE-SR4, 50GBASE-R2, 50GBASE-R4, 40GBASE-CR4,
40GBASE-KR4, 40GBASE-SR4, 40GBASE-LR4, 40GBASE-ER4, 40GBASE-R2, 25GBASE-R, 20GBASE-KR2,
10GBASE-LR,10GBASE-ER, 10GBASE-CX4, 10GBASE-CR, 10GBASE-KR, SGMII, 1000BASE-CX, 1000BASE-
KX, 10GBASE-SR
Data Rate
Gen3/4: SERDES @ 8.0GT/s/16GT/s, x16 lanes (2.0 and 1.1 compatible)
Adapt
Voltage: 12V, 3.3VAUX
er
Card
Power
Power
Typical Power
Maximum Power
Voltage: 3.3Aux
Maximum current: 100mA
a
InfiniBand
Ethernet
b
Passive Cables
Please refer to ConnectX-6 VPI Power Specifications (requires NVONline
login credentials)
SDR/DDR/QDR/FDR/EDR
1/10/25/40/50/100 Gb/s
Cable
21.0W
88