Mcx653106A-Hdat Specifications - Nvidia ConnectX-6 User Manual

Notes: a. The ConnectX-6 adapters supplement the IBTA auto-negotiation specification to get better
bit error rates and longer cable reaches. This supplemental feature only initiates when connected to
another NVIDIA InfiniBand product.
b. Typical power for ATIS traffic load.
c. For both operational and non-operational states.
d. For engineering samples - add 250LFM

MCX653106A-HDAT Specifications


Please make sure to install the ConnectX-6 card in a PCIe slot that is capable of supplying
the required power and airflow as stated in the below table.
Physic
Adapter Card Size: 6.6 in. x 2.71 in. (167.65mm x 68.90mm)
al
Connector: Dual QSFP56 InfiniBand and Ethernet (copper and optical)
Protoc
InfiniBand: IBTA v1.4
ol
Auto-Negotiation: 1X/2X/4X SDR (2.5Gb/s per lane), DDR (5Gb/s per lane), QDR (10Gb/s per lane),
Suppo
FDR10 (10.3125Gb/s per lane), FDR (14.0625Gb/s per lane), EDR (25Gb/s per lane) port, HDR100 (2
rt
lane x 50Gb/s per lane), HDR (50Gb/s per lane) port
Ethernet: 200GBASE-CR4, 200GBASE-KR4, 200GBASE-SR4, 100GBASE-CR4, 100GBASE-KR4,
100GBASE-SR4, 50GBASE-R2, 50GBASE-R4, 40GBASE-CR4, 40GBASE-KR4, 40GBASE-SR4, 40GBASE-
LR4, 40GBASE-ER4, 40GBASE-R2, 25GBASE-R, 20GBASE-KR2, 10GBASE-LR,10GBASE-ER, 10GBASE-
CX4, 10GBASE-CR, 10GBASE-KR, SGMII, 1000BASE-CX, 1000BASE-KX, 10GBASE-SR
Data Rate
PCI Express Gen3/4: SERDES @ 8.0GT/s/16GT/s, x16 lanes (2.0 and 1.1 compatible)
Adapt
Voltage: 12V, 3.3VAUX
er
Card
Power
Power
Typical Power
Maximum Power
Voltage: 3.3Aux
Maximum current: 100mA
Maximum power available through QSFP56 port: 5W
a
InfiniBand
Ethernet
Cable
b
Passive Cables
Please refer to ConnectX-6 VPI Power Specifications (requires NVONline
login credentials)
SDR/DDR/QDR/FDR/EDR/HDR100/
HDR
1/10/25/40/50/100/200 Gb/s
23.6W
82