Airflow (LFM) /
Temperature
Regulatory
Safety: CB / cTUVus / CE
EMC: CE / FCC / VCCI / ICES / RCM / KC
RoHS: RoHS Compliant
Notes: a. The ConnectX-6 adapters supplement the IBTA auto-negotiation specification to get better
bit error rates and longer cable reaches. This supplemental feature only initiates when connected to
another NVIDIA InfiniBand product.
b. Typical power for ATIS traffic load.
c. For both operational and non-operational states.
d. For engineering samples - add 250LFM
MCX654106A-HCAT Specifications
Please make sure to install the ConnectX-6 card in a PCIe slot that is capable of supplying
the required power and airflow as stated in the below table.
For power specifications when using a single-port configuration, please refer to
MCX654105A-HCAT Specifications
Physical
Low Profile Adapter Card Size: 6.6 in. x 2.71 in. (167.65mm x 68.90mm)
Auxiliary PCIe Connection Card Size: 5.09 in. x 2.32 in. (129.30mm x 59.00mm)
Two Cabline CA-II Plus harnesses (white and black) Length: 35cm
Connector: Dual QSFP56 InfiniBand and Ethernet (copper and optical)
Ambient
Passive Cables
NVIDIA Active 4.7W Cables
Cable Type
Airflow Direction
Heatsink to Port
600 LFM / 55°C
d
600 LFM / 55°C
Port
to
Heats
ink
350
LFM /
35°C
350
LFM /
35°C
91