Pepperl+Fuchs PROFINET VBG-EP1-KE5-D Series Brief Instructions page 12

PROFINET: Changeover from ASi gateways type K20 to KE5
PROFINET Integration
Add VBG-EP1-KE5-D* to the PROFINET controller
1.
Remove the K20 gateway from the network.
2.
Add the new KE5 gateway to the PROFINET controller.
Figure 4.1
Assign PROFINET station name
1.
Assign the station name of the K20 gateway to the VBG-EP1-KE5-D*.
Configuration of the data image and device parameters
1.
Enable "Download device parameters" and adjust the ASi device parameters to match those of
the previously used K20 gateway.
Figure 4.2
2.
Add the data image from the K20 gateway to the new VBG-EP1-KE5-D*.
12