Scanning Regular, Non-Damaged Photos (1) - Microtek ScanMaker i800 Supplementary Manual

This scenario uses the Standard Control Panel.
1. Raise the scanner lid, and place the photo to be
2. Double-click the ScanWizard 5 icon ( ) on your desktop to launch the
3. In the preview window, you can resize the scan frame (floating dotted line) around
4. Click the Original button, then select Photo.
5. Click the Scan to button to scan the image.
Resize the scan
frame to adjust
the actual size of
your scan

Scanning Regular, Non-Damaged Photos (1)

scanned face down on the scanner glass surface.
Position the top end of the photo towards the
back of the scanner.
Note: For the automatic cropping feature to
work correctly during the preview scan of your
photo, make sure the Black Mat is attached on
the scanner lid before you launch ScanWizard 5.
ScanWizard 5 Standard Control Panel.
When ScanWizard 5 launches, it automatically performs a fast preview of the
material on your scanner glass surface and displays it in the preview area.
the image by dragging on the edge or corner of the scan frame to determine the
final size of the actual scan.
The Black Mat
comes
preattached to
the scanner lid.
• Allows you to switch to the
Advanced Control Panel
• Shows the scanner type,
model, and status
• Contains the built-in
ScanWizard 5 help
• Exits ScanWizard 5
• Minimizes ScanWizard 5
(Windows only)
Selections and options for
image settings
ScanMaker i800 Supplement 17