Using The 6 X 9 Cm Film Holder - Microtek ArtixScan 1800f Installation And Operation Manual

C. Using the 6 x 9 cm Film Holder
The 6 x 9 cm Film Holder can hold four transparencies at a time, and allows you to
scan several different film sizes of transparencies, including 6 x 4.5 cm, 6 x 6 cm, 6 x 7
cm, and 6 x 9 cm.
1. Place the film into the holder.
a) Push on the side to open the lid.
b) Place the film in the holder.
c) Pull down the side to close the lid.
a)
2. Put the film holder into
the transparency tray.
3. Insert the whole assembly
into the transparency bay
(the drawer or lower
compartment) of the
scanner.
b)
ArtixScan 1800f Installation and Operation Manual
c)
17