Microtek ArtixScan 1800f Installation And Operation Manual page 20

2. Put the filmstrip holder into
3. Insert the whole assembly
Caution:
When the filmstrips are closed, do not move or touch the filmstrips. If you do so, this
will bend the original and possibly result in out-of-focus scans.
16 ArtixScan 1800f Installation and Operation Manual
c) Align the frame-by-frame
partition on your filmstrip with
the Arrow mark of the holder.
d) Snap to close the lid.
The partitions on the holder
should match the filmstrip's
frame-by-frame partitions.
the Main Holder.
into the transparency bay
(the drawer or lower
compartment) of the
scanner.
Frame-by frame
partition
Arrow mark