Table of Contents
Advertisement
Menu
PROCESS DATA
Process control data display.
DISPLAY
(LCD display)
*Pressing the [
*Pressing [OK] key displays the process control data.
*Using [MENU] moves to the next item
*Pressing [BACK/C] key terminates the process control data display mode.
group is:
XXX CHECK.
Controller port check.
(LCD display)
*Pressing the [
*Pressing [OK] key start the port check.
*Pressing [BACK/C] key terminates the the port check mode.
SELECT IN SIGNAL
Select in signal setting.
SET
(LCD display)
*Pressing [OK] key start the select in signal setting mode.
*Using the [
*Pressing [OK] key starts the select in signal setting.
*Pressing [BACK/C] key terminates the select in signal setting mode.
DRUM ADJ. (VG)
] or [
] key selects the group.
X:
A:
B:
CENTRO PORT CHECK
] or [
] key selects the port check mode.
XXX:
SELECT IN SIGNAL SET
] and [
] keys changes the ON or OFF.
AR-P350 DIAG-21
Content
30
process control data
toner control data
OK
CENTRO PORT CHECK
NIC CHECK (network interface card check)
ON
Initial
Set range
value
Advertisement
Table of Contents
