Table of Contents
Advertisement
Menu
MNT CYCLE SETUP
Maintenance cycle setup.
Used to set the maintenance cycle.
(LCD display)
*Pressing [OK] key displays the maintenance cycle.
*Using [
*Pressing [OK] key set the change of the maintenance cycle.
*Pressing [BACK/C] key terminates the setting.
LIFE OVER SETTING
Life over setting.
Used to set whether to stop printing when the developer life is over.
(LCD display)
*Pressing [OK] key start the setting.
*Using [
*Pressing [OK] key memorize the life over mode.
*Pressing [BACK/C] key terminates the setting.
FINISHER JOGGER
Finisher jogger adjustment.
ADJ.
Used to adjust the finisher (AR-FN6/FN7) jogger.
For details, refer to each Service Manual of the AR-FN6/FN7.
(LCD display)
*Press [OK] key to display the finisher jogger adjustment value.
*Using [
*Press [MENU] key to display the adjustment value.
*Press [
*Pressing [OK] key starts the finisher jogger adjustment.
*DATA ( LED) blinks during the processing.
*Pressing [BACK/C] key terminates the finisher jogger adjustment.
CONSOLE FIN. SET X Console finisher setting.
Used to perform the adjustments of the console finisher (AR-FN7).
For details, refer to the Service Manual of the AR-FN7.
(LCD display)
*Pressing the [
*Pressing [OK] key start the setting.
*Using [
*Pressing [OK] key memorize thevalue.
*Pressing [BACK/C] key terminates the setting.
MNT CYCLE SETUP
] and [
] keys changes the maintenance cycle.
LIFE OVER SETTING
] and [
] keys changes the YES or NO.
FINISHER JOGGER ADJ.
] or [
] key changes the value.
] or [
] key to change the value.
CONSOLE FIN. SET X
] or [
] key select the console finisher mode.
] and [
] keys changes the value.
AR-P350 DIAG-19
Content
Initial
Set range
value
Set
value
DEFAU
LT
40K
50K
80K
100K
120K
FREE
Set
value
YES
NO
Advertisement
Table of Contents
