Table of Contents
Advertisement
Menu
CONSOLE FIN. SET X Console finisher setting.
Used to perform the adjustments of the console finisher (AR-FN7).
For details, refer to the Service Manual of the AR-FN7.
TROUBLE MEM.
Trouble memory mode setting.
MODE SET
Used to set the storing method of data into memory in case of a trouble.
(LCD display)
*Pressing [OK] key start the setting.
*Using [
*Pressing [OK] key memorize thevalue.
*Pressing [BACK/C] key terminates the setting.
LAST JAM CODE DISP Last jam code display.
Used to display the jam history.
(LCD display)
*Pressing [OK] key enter the last jam code display mode.
*Pressing [BACK/C] key terminates the last jam code display mode.
SYSTEM
System information dispaly.
INFORMATION X
Use to display the machine information.
(LCD display)
*Pressing the [
*Pressing [OK] key displays the system information.
*Using [MENU] moves to the next item.
*Pressing [BACK/C] key terminates the system information
Mode group is:
X:
A:
B:
C:
D:
E:
F:
G:
H:
I:
J:
MEMORY MODE SETTING
] and [
] keys changes the value.
Set value
ONCE
The same trouble as the previous one is not stored.
ANY
Any trouble is stored unconditionally.
LAST JAM CODE DISP
SYSTEM INFORMATION X
] or [
] key selects the group.
X:
A:
B:
C:
AR-P350 DIAG-20
Content
saddle binding position
saddle fold position
console finisher adjustment (front)
console finisher adjustment (rear)
staple position (rear)
staple position (front)
center adjustment (staple)
staple pitch
center adjustment (punch)
punch position
Operation
ROM version
machine speed
process type
Initial
Set range
value
Set
value
ONCE
ANY
Advertisement
Table of Contents
