Table of Contents
Advertisement
2. Note for installation place
Improper installation may damage this product. Please note the following
during initial installation and whenever the machine is moved.
1) The machine should be installed near an accessible power outlet for
easy connection.
2) Be sure to connect the power cord only to a power outlet that meets
the specified voltage and current requirements. Also make certain
the outlet is properly grounded.
•For the power supply requirements, see the name plate of the main
unit.
3) Do not install your machine in areas that are:
•damp, humid, or very dusty
•exposed to direct sunlight
•poorly ventilated
•subject to extreme temperature or humidity
changes, e.g., near an air conditioner or heater.
4) Be sure to allow the required space around the machine for servicing
and proper ventilation.
23-5/8"
(60cm)
3.Unpacking procedure
1
1
1
Check the following items are included in the package.
Dust cover
Magnification ratio table
Paper size indication seal
Developer
Toner bottle for installation
CD-ROM for AR-350/450 series printers
Operating Manual
Counter kit contract
11-13/16" (30cm)
23-5/8"
(60cm)
23-5/8" (60cm)
1
1
AR-P350 UNPACKING AND INSTALLATION-2
4. Machine installing procedure
Note: In advance to installation of the machine, the paper feed option
units (AR-MU1, AR-D13 or AR-D14) should have been installed.
A. Removal of the machine
1) Pull out the front tray and remove it from the machine.
2) Hold the machine with your both hands and remove it from the
package box s shown in the figure.
Note: The center of gravity of the machine lies in the left side when
viewed from the machine. When lifting the machine, be careful not
to drop.
Front
Rear
Advertisement
Table of Contents
