Advertisement
Overview
This guide describes the following procedures.
Section 1: Preparation before Printing
Section 2: Placement of Originals
Section 3: Printing of Paper Originals
Page 1
Section 1:
Preparation before Printing
Sub-section 1:
Setting up the paper feed tray and
the paper
Step 1
Open the paper feed tray.
While holding the paper feed tray with your
hand, open it until it stops.
Step 2
Place the paper on the paper feed
tray.
Place the paper with the printing side facing up.
Use the same orientation as that of the original.
Step 3
Adjust the feed-tray paper guides.
Raise the lock levers on both sides of the feed-
tray paper guides so that you can slide the
feed-tray paper guides by hand.
Tightly fit the feed-tray paper guides to the
paper, and then push down the lock levers on
both sides to lock the guides.
Do not use inappropriate paper or
mix paper of different sizes. It
may cause a paper jam or
damage your printer.
Advertisement
