Mercedes-Benz S-Class Saloon 2021 Owner's Manual page 40

3.
References of harmonized and other standards or
speci cations
ISO 4063, EN ISO 14341-A, AS 2693, DBL
8230.10, DBL 7382.20, DBL 7392.10, DBL
8451.15, MBN 10435,
Technical documentation of the product is stored
at the premise of the manufacturer. The person
responsible for assembling the technical docu-
mentation of the product: Head of the Technical
Department Brano a.s.
4.
Hradec nad Moravicí
Place
5.
05.10.2020
Date
Engineer Petr Petr
[Signature]
Director of division ZZ
TIREFIT kit TIREFIT kit
Copy and translation of the original declaration of
conformity:
EC declaration of conf EC declar ation of confor ormity mity
In accordance with EC Directive 2006/42/EC
We hereby declare that the product
Product designation: Daimler electric air pump
Model designation: 0872, DT/UW 200077 - IBK-
LK2P
MB part no.: A 000 583 9204
complies with the following relevant regulations:
2014/30/EU
Applied harmonised standards, in particular:
DIN EN 55014-1: 2017
DIN EN 55014-2: 2015
Manufacturer: Dunlop Tech GmbH
Address: O enbacher Landstrasse. 8, 63456
Hanau
Authorised representative: IMS dept.
Date: March 2020
General notes
Signature: IMS-AE, IMS-AE-L
Diagnos Diagnostics connection tics connection
The diagnostics connection is a technical inter-
face in the vehicle. It is used, for example, in the
context of repair and maintenance work or for
reading out vehicle data in a specialist workshop.
Diagnostic devices should therefore only be con-
nected in a quali ed specialist workshop.
& W W ARNING
ARNING Risk of accident due to con-
necting devices to the diagnostics con-
nection
If you connect devices to the diagnostics con-
nection of the vehicle, the function of vehicle
systems and operating safety may be
impaired.
For safety reasons, we recommend that
#
you only use and connect products
approved by your Mercedes-Benz service
centre.
37 37