Table of Contents
Advertisement
246 Driving and parking
246
Combo 1 vehicle socket
Combo 2 vehicle socket
Press the centre rear section of socket ap
#
1
and swing the socket ap forwards and
open.
The % indicator lamp
3
display
4
light up white.
%
When the vehicle is switched on (the õ
display is lit in the driver's display), socket ap
1
cannot be opened.
Press catch
#
cover 2.
%
The CCS charging cable connector requires
connections
essary to open both parts of socket cover 2.
Insert the CCS charging cable connector into
#
the vehicle socket to the stop.
Make sure that the charging cable is not taut
when inserted.
The # indicator lamp
display
high-voltage battery is charged, green.
%
When the charging sequence for the ambient
lighting is activated, the ambient lighting lights
up for approximately 30 seconds as with the
# indicator lamp
and upper status
When the charging cable is connected to the vehi-
cle, the vehicle cannot be started or moved.
At the start of the charging process, the charge
level display is shown in the driver's display with a
7
to the right and fold up socket
6
and 8. Therefore, it is nec-
5
and lower status
4
ash orange and, as soon as the
5
(
page 169).
/
Advertisement
Table of Contents
