Table of Contents
Advertisement
* N N O O TE TE Damage due to overheating of
charging cable and charging cable con-
nector
During the charging process, the charging
cable and charging cable connector can heat
up within their permissible limit values.
The permissible limit values are in uenced by
the following factors:
the power supply system and the charging
R
cable are not damaged
the instructions for handling the charging
R
cable and the control element on the
charging cable have been observed
If the charging cable or charging cable
#
connector becomes too hot, have the
power supply system checked.
* N N O O TE TE Damaged or dirty vehicle socket
when the socket ap is open
Always keep the socket cover and the
#
socket ap closed when there is no
charging cable connected. This protects
the vehicle socket from dirt and damage.
Make sure that the socket cover is
#
closed properly before closing the socket
ap. This can otherwise result in damage
which may prevent the socket ap from
being opened again.
* N N O O TE TE Damage to the vehicle socket or the
charging cable connector due to incorrect
handling
Do not use excessive force (maximum 300 N)
to insert the charging cable connector into the
vehicle socket to the stop. You may otherwise
damage the vehicle socket, the charging cable
connector or their contacts.
If you feel there is increased resistance,
#
pull the charging cable connector out of
the socket and reinsert it.
R R eq equir uirements:
ements:
The transmission is in position j.
R
Driving and parking 245
The vehicle is unlocked or the distance
R
between the key and the vehicle does not
exceed 1 m.
The vehicle is not switched on. The õ dis-
R
play in the driver's display is o .
The charging cable is not taut.
R
%
Depending on the national version, the vehicle
is equipped with one of the following vehicle
sockets.
245
Advertisement
Table of Contents
