Table of Contents
Advertisement
248 Driving and parking
248
Press charging interruption button 2.
#
The charging process is ended. The % indi-
cator lamp
1
lights up white. The vehicle
socket is unlocked.
%
If you cannot remove the charging cable con-
nector, unlock the vehicle and repeat the pro-
cedure. If the charging cable connector is still
locked, contact a quali ed specialist work-
shop.
Close the socket cover and the socket ap.
#
%
A er the charging cable connector has been
disconnected, the le % indicator lamp
on the vehicle socket remains lit for some
time before switching o .
F F unction of t
unction of the c
he charg
harge lev
e level displa
display
display
1
1
Range at current charge level
2
Current charge level of the high-voltage bat-
tery
3
Maximum charge level (depending on the set-
ting)
4
Time remaining until completely charged (until
the selected maximum charge level is
reached)
5
Dynamic charge level display
6
Current charging capacity
el display in t
y in the dr
he driv iver's
er's
%
When the vehicle is connected to the mains sup-
ply and is switched o , the driver's display shows
the charge level display for approximately two
minutes.
%
P P ar arking
P P ar arking t
king the v
& W W ARNING
If the vehicle is not securely parked su -
ciently, it can roll away in an uncontrolled way
even at a slight downhill gradient.
#
Speci ed remaining range
1
may vary due to
di erent factors, e.g. driving style or topogra-
phy.
The value of current charging capacity
di er from the display on the charging station.
king
he vehicle
ehicle
ARNING Risk of accident and injury
caused by an insu ciently secured vehi-
cle rolling away
On uphill or downhill gradients, turn the
front wheels so that the vehicle rolls
towards the kerb if it starts moving.
6
can
Advertisement
Table of Contents
