Hydraulic Control Unit Use Reference Chart - Kubota B2301-1 Operator's Manual

38 HYDRAULIC UNIT
BHydraulic Control Unit Use Reference Chart
In order to handle the hydraulics properly, the operator must be familiar with the following. Though this information may not
be applicable to all types of implements and soil conditions, it is useful for general conditions.
Implement
Soil condition
Light
Moldboard plow Medium
Heavy soil
Disc plow ---
Harrower (spike,
springtooth, disc
type)
---
Sub-soiler .........
Weeder, ridger
Earthmover,
digger, scraper,
manure fork, rear
carrier ......
---
Mower (mid-and
rear-mount type),
hayrake, tedder...
Top link mounting
holes
soil
soil
(1) is standard.
(2) is used only
when there is
some obstacle
that prevents you
from using the
standard.
(1) Position Gauge
control lever wheel
YES/NO
Position control
YES
YES/NO
Remarks
Telescopic
stabilizers
Insert the set-pin
through the slot on
the outer tube that
align with one of the
holes on the inner
bar.
Loose
For implements
with gauge wheels,
lower the
implements to the
ground.
Telescopic
stabilizer should be
tight enough to
prevent excessive
implement
movement when
Tighten implement is in
raised position.
For implements
with gauge wheels,
lower the
implements to the
ground.