Error Indication; Error Code - Panasonic HG-F1 Series Manual

PRECAUTIONS FOR PROPER USE

Error indication

• In case of an error, try the following remedy.

Error code

Internal memory is abnormal, damaged, or has
Er01
passed its life expectancy.
Control output load has shortcircuited and
Er11
excessive current is flowing.
During zero setting, the measurement is not
Er31
performed properly.
During teaching, the measurement is not
Er41
performed properly.
The beam emitting part or the beam receiving
Er51
part is abnormal.
Er90, Er91,
Er92, Er93,
System error
Er94, Er95,
Er96
Main Inspection Items
• Inspect the sensor regularly to maintain performance and enable optimum use.
The main inspection items are as follows:
• Is the product installation loose?
• Have any input and output terminals become loose or come off?
• Are there cracks in the cable?
• Is the spot beam deviated from the set position?
• Is the supplied power within the rated voltage range (24 V DC ±10%)?
• Is the ambient temperature within the specified range (-10 to +45 °C +14 to +113 °F)?
• Is the ambient humidity within the specified range (35 to 85% RH)?
• Are the light emitting and receiving windows of the sensor contaminated with dirt or foreign matter?
14 Panasonic Industry Co., Ltd.
Refer to the instruction manual for details. The instruction manual can be downloaded from our website.
Description Remedy
• Switch the power OFF and then ON, and select and execute the
reset setting (initialization of this product) from setting items.
• If the sensor does not recover after the above action, consult
your Panasonic representative.
Turn OFF the power and check the load.
Check if the sensing distance to be set is within the specification
range.
Check if the sensing distance to be set is within the specification
range.
Turn the power OFF and then ON. If the sensor does not recover
after the above action, consult your Panasonic representative.
The product could be faulty.
Please consult your Panasonic representative.