Checking, Adjustment And Maintenance; Oil Check - Braaap Moto3 User Manual

VI. Checking, adjusting and maintenance
Checking the oil
Check oil before riding. Check oil on flat ground with side stand down.
Remove dipstick from pouring tube and make sure that the oil is within the
upper and lower limit lines.
Oil replacement
Please use the special appointed Braaap oil.
Oil is important for the engine to run efficiently so be sure to check the oil regularly. Change the oil after the first 500kms.
After this change the oil every 2000kms (however it is recommended to check the oil every 1000km)
While the engine is warm/hot carefully remove the drain plug to drain the old oil.
Wash the oil screen. Once properly re-installed then pour 1.2L of new oil into the engine. When finished start the engine
and let it idle for 2-3mins.
After this time check to see if the oil level is between the upper and lower limits. If it is to low add a little more and if there
is to much drain it out.
Upper and lower markers Oil gauge
Do not use different grades of oil.
22
Moto3 User Manual