Gear Shifting - Braaap Moto3 User Manual

Gear shifting

Preheat engine to make it run normally.
1. When the engine is at idle speed, engage the clutch (hold the clutch lever in) and push the gearshift pedal with your foot
to change gear. Enter the low gear (1st gear) position.
2. Gradually Increase the rotation speed of the engine while slowly releasing the clutch lever so that the bike starts to
slowly move forward.
3. Once the bike has reached a balanced running state, reduce the rotation speed of the engine then engage the clutch,
then raise the gear shift pedal to the 2nd gear position.
The same method can be used for the rest of the gears.
20
International Six-speed
6 Reverse gear
5
4
3
2
N Forward gear
1
Moto3 User Manual