Table of Contents
Advertisement
IV. Operation
Power Switch
Position Function
On
For parking (all circuit cut off) Key could be removed
Off
For starting up and driving
Lock
For locking Steering stem
Warning
When in locked position, do not push the motorcycle. As the
steering is locked and the motorcycle may loss its balance and
cause harm to the bike and/or the person or people pushing it.
Fuel switch
1. Filling the tank with fuel
Refer to the specifications for fuel tank capacity. Place the
Vehicle on its main stand, unscrew the fuel cap and fill the
tank with fuel.
After filling, tighten the fuel tank cap by aligning the ^ mark on
the cap with that on the fuel tank
Caution
Use unleaded or low-lead gasoline fuel graded #90 or higher.
16
Note
Key can't be removed
Key could be removed
2. Use of the fuel valve (switch on fuel tank)
position
function
open
when the fuel cock is set
to the position, the fuel
passage is open
Closed
When the fuel line is set
to this position the fuel
line is closed
reserve
when the fuel cock is set
to this position the fuel in
reserve is being used
Caution
if the fuel tank valve lever is in the "open" position quite often,
excessive fuel will enter the carburetor and may even flow into
the engine. If the engine is started in this condition it may cause
sever damage to the engine.
1. open
2. closed
3. reserve
remarks
The fuel supply is turned
on
the fuel supply is cut off
the fuel in reserve is used
only after the normal fuel
supply has run out.
Moto3 User Manual
Advertisement
Table of Contents
