Table of Contents
Advertisement
Connector panel
AC power input
DP signal input
Note: the cable tie hole is the position through which the tie wrap passes to bind the cable. It just needs to pass the tie warp through
the hole and bind the cable to fix the cable connection.
Touch Monitor Connections
1.
Connect one end of the DP, HDMI or VGA video cable to the DP/HDMI/VGA input connector of the monitor and the other end to
the DP/HDMI/VGA video source. (Tighten the screws on the VGA cable connector for best performance.)
2.
Connect the USB touch line between the USB-B interface of the monitor and the USB-A port on your PC.
3.
Connect the audio cable between the audio out of the monitor and your audio source.
4.
Use the power cable to connect the power supply with the power input interface of the monitor.
5.
The touch monitor ships in an OFF status.
User Manual<70 Series Monitor>
UM600633 Rev A
HDMI signal input
VGA signal input
Press the power button to switch it on.
Audio input or output
USB-B interface
Cable tie hole
USB-A interface
6
Advertisement
Table of Contents
