MiLAN MIL-225C Installation Manual

100basefx/oc-3 single-mode to multi-mode fiber converter

Advertisement

R eg ul at or y Ap p rovals
FCC Class A
UL 1950
CSA 22 No. 950
EN60950
CE
– EN55022 Class B
– EN50082-1
C an ad ia n EMI No t ice
This Class A digital apparatus meets all the requirements of the Canadian Interference-Causing
Equipment Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel
brouilleir du Canada.
Europe an Not ice
Products with the CE Marking comply with both the EMC Directive (89/336/EEC) and the Low
Voltage Directive (73/23/EEC) issued by the commission of the European Community. Compliance
with these directives implies conformity to the following European Norms:
EN55022 (CISPR 22) - Radio Frequency Interference
EN50082-1 (IEC801-2, IEC801-3, IEC801-4) - Electromagnetic Immunity
EN60950 (IEC950) - Product Safety
Five-Year Limited Warranty
MiLAN Technology warrants to the original consumer or purchaser that each of its products,
and all components thereof, will be free from defects in material and/or workmanship for a
period of five years from the original factory shipment date. Any warranty hereunder is
extended to the original consumer or purchaser and is not assignable.
MiLAN Technology makes no express or implied warranties including, but not limited to, any
implied warranty of merchantability or fitness for a particular purpose, except as expressly set
forth in this warranty. In no event shall MiLAN Technology be liable for incidental or
consequential damages, costs, or expenses arising out of or in connection with the performance
of the product delivered hereunder. MiLAN Technology will in no case cover damages arising
out of the product being used in a negligent fashion or manner.
To C ont act MiL AN Tech n ol o g y
For prompt response when calling for service information, have the following information ready:
Product serial number and rev.
Date of purchase
Vendor or place of purchase
You can reach MiLAN Technical Support at 408/744-2751
Or E-mail at support@milan.com
Address:
1299 Orleans Drive
Sunnyvale, CA 94089
Voice:
408/744-2775
Fax:
408/744-2793
Web:
www.milan.com
® Copyright 1997 MiLAN Technology
Printed in the USA
P/N: 90000063 Rev. B
MIL-225C
100BaseFX/OC-3
Single-mode to Multi-mode
Fiber Converter

Installation Guide

Multi-mode to Single-mode
and
Single-mode to Multi-mode
This guide includes the following information:
"Introduction" on page 2
"Installation" on page 3
"Theory of Operation" on page 4
"Specification" on page 5
Installation Guide MIL-225C

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MIL-225C and is the answer not in the manual?

Questions and answers

Summary of Contents for MiLAN MIL-225C

  • Page 1: Installation Guide

    fitness for a particular purpose, except as expressly set forth in this warranty. In no event shall MiLAN Technology be liable for incidental or consequential damages, costs, or expenses arising out of or in connection with the performance of the product delivered hereunder.
  • Page 2 I ntroduction The MIL-225C is a 100Mbps Fast Ethernet and ATM (OC-3) device that converts multi-mode fiber optic signals to single-mode fiber optic signals and vice versa. The device has two SC connectors: • SM port (single-mode fiber) • MM port (multi-mode fiber) The MIL-225C is capable of supporting both multi-mode fiber cable with a 2 Km signal driving distance and single-...
  • Page 3 1. Connect an SC-type, single-mode cable to the SM 75 ohm 5.25 V 2. Connect an SC-type, multi-mode cable to the MM 3. Supply power to the MIL-225C using the power 1261-1360 nm 9/125 m 4. Check the SMSD LED and the MMSD LED for -15.0 dBm...
  • Page 4 MM port Sp ec i fi c ati o ns Power Sup ply External power is required for the MIL-225C. The system draws 700 mA at normal operation in room temperature of 25° C. •...

Table of Contents