MiLAN MIL-S341X Installation Manual

r‡‰š'ƒ™"—Ÿ@a••—"›ƒ'
FCC Class A
4
UL 1950
4
CSA C22.2 Number 950
4
EN60950
4
CE
4
- EN55022 Class B
- EN55024
NOTE: To comply with EN5502 Class B, shielded data cable is required.
cƒ"ƒ†‹ƒ"@emi@n"™‹...‡
This Class A digital apparatus meets all the requirements of the Canadian Interference-Causing Equipment Regulations.
Cet appareil numerique de la classe A respecte toutes les exigences du Reglement sur le materiel brouilleur du Canada.
eš—"•‡ƒ"@n"™‹...‡
Products with the CE Marking comply with both the EMC Directive (89/336/EEC) and the Low Voltage
Directive (73/23/EEC) issued by the commission of the European Community Compliance with these directives
implies conformity to the following European Norms:
EN55022 (CISPR 22) - Radio Frequency Interference
4
EN50082-1 (IEC801-2, -3, -4) - Electromagnetic Immunity
4
EN60950 (IEC950) - Product Safety
4
f‹›‡My‡ƒ—@l‹'‹™‡†@wƒ——ƒ"™Ÿ
MiLAN Technology warrants to the original consumer or purchaser that each of it's products, and
all components thereof, will be free from defects in material and/or workmanship for a period of
five years from the original factory shipment date. Any warranty hereunder is extended to the
original consumer or purchaser and is not assignable.
MiLAN Technology makes no express or implied warranties including, but not limited to, any
implied warranty of merchantability or fitness for a particular purpose, except as expressly set
forth in this warranty. In no event shall MiLAN Technology be liable for incidental or
consequential damages, costs, or expenses arising out of or in connection with the performance
of the product delivered hereunder. MiLAN Technology will in no case cover damages arising
out of the product being used in a negligent fashion or manner.
t—ƒ†‡'ƒ—Ž˜
© 2000 MiLAN, the MiLAN logo and MiLAN Technology are either trademarks or registered
trademarks of Digi International, Inc. in the United States and/or other countries. All other
trademarks are the property of their respective holders.
t"@c""™ƒ...™@m‹lan@t‡...Š""'"‰Ÿ
For prompt response when calling for service information, have the following information ready:
Product serial number and revision
4
Date of purchase
4
Vendor or place of purchase
4
You can reach MiLAN Technology technical support at:
E-mail: support@milan.com
Telephone: 1.408.744.2751
Fax: 1.408.744.2771
MiLAN Technology
1299 Orleans Drive
Sunnyvale, CA 94089-1138
United States of America
Telephone: 1.408.744.2775
Fax: 1.408.744.2793
http://www.milan.com
info@milan.com
© Copyright 2000 MiLAN Technology Printed in the USA P/N: 90000220 Rev. C
mdiMx@mdi
milM
sSTQP
QPOQPPbaseMtx
MIL-S3410 provides 10/100BASE-TX to 10/100BASE-TX
md iMx @ mdi d
milM
sSTQR
QPOQPPbaseMtx
MIL-S3412 provides 10/100BASE-TX to 100BASE-FX, MMF with ST connector.
mdiMx@mdi d
milM
sSTQS
QPOQPPbaseMtx
MIL-S3413 provides 10/100BASE-TX to 100BASE-FX, MMF with SC connector.
MIL-S3413-15 provides 10/100BASE-TX to 100BASE-FX, SMF with SC connector.
MIL-S3413-40 provides 10/100BASE-TX to 100BASE-FX, SMF with SC connector.
MIL-S3413-60 provides 10/100BASE-TX to 100BASE-FX, SMF with SC connector.
MIL-S3413-100 provides 10/100BASE-TX to 100BASE-FX, SMF with SC connector.
mdiMx@mdi d
milM
sSTQT
QPOQPPbaseMtx
MIL-S3414 provides 10/100BASE-TX to 100BASE-FX, MMF with MT-RJ connector.
MIL-S3414-15 provides 10/100BASE-TX to 100BASE-FX, SMF with MT-RJ connector.
The MIL-S341X series are Ethernet media and rate converter modules for use in MiLAN
Technology's Media Conversion System. MCS master and slave management modules can
access the MIL-S341X series to implement features and monitor status. The series provides
packet switch functions between 10Mbps and 100Mbps using store and forward
architecture at full wire speed. They also support auto-negotiation on a per-port basis;
more than 8K MAC addresses; Packet buffer memory of 2Mbytes, backpressure in half-
duplex mode and VLAN Tag packet size feature.
Installation Guide: MIL-S341X Series
d
d mdiMx@mdi
a a
s
s
l l
QPOQPPbaseMtx
t x rx
d
a
a
s s
l l
QPP b a se M fx @Hst I
mmf@Rk '
tx rx
d
a a
s s
l l
QPPbaseMfx@HscI
mmf@Rk'
d
a a
s s
l l
QPPbaseMfx@HmtMrjI
mmf@Rk'