Table of Contents
Advertisement
Installation Manual
7 Installation
7.1 Wall Mounting the Water Heater
1. Remove the 2 screws used for shipping on the backside of the unit and recycle.
They are no longer needed.
Figure 4
2. Remove 2 screws located on the bottom of the cover and save for reinstallation.
Figure 5
NOTICE: PRODUCT DAMAGE!
BEFORE PROCEEDING TO THE NEXT STEP, it is important
to know there is a wiring harness connected to the
backside of the front cover. This must be disconnected to
fully remove the cover. DO NOT pull cover out and away
completely without disconnecting wiring first or damage
may occur.
3. Pull bottom of cover forward and swing out (pos.1). Lift away from tabs on the
top of the back cover (pos.2). Do not fully remove cover.
1 2 |
Figure 6
4. Disconnect wiring harness connected to the inside of the front cover.
Figure 7
5. Remove cover completely.
6. Choose a suitable mounting surface that is solid and secure.
WARNING: ELECTRIC SHOCK HAZARD
Do not install the unit above electrical boxes or junctions.
Bosch Tronic 6100 C Electric Tankless Water Heaters - BTC 724001301 A (08.2022)
2
2
2
1
Advertisement
Table of Contents
