Advance Planning; Prepare Dishwasher Enclosure - GE Monogram ZBD6890KII Manual

Fully integrated built-in dishwasher
Table of Contents

Advertisement

Available languages

Available languages

ADVANCE PLANNING

• These dishwashers are designed for versatility,
adaptable to virtually any installation.
• All models have a full length door without the
traditional access panel.
• These dishwashers may be installed beneath
countertops of stone or other materials that will not
accept screws. No trim kit required.

PREPARE DISHWASHER ENCLOSURE

This Wall Area
must be Free of
Pipes or wires
34-1/2" Min.
Underside of
5"
4"
Countertop
to Floor
24" Min.
Floor MUST
be Even with
Room Floor
*Dishwasher models ZBD6890
and ZBD0700 require a 3/4"
thick custom panel and will be
24-3/4" deep.
• The rough cabinet opening must be at least 24" deep,
24" wide and approximately 34-1/2" high from floor to
underside of the countertop.
• Plumbing and electrical service must enter the shaded
area.
• The dishwasher must be installed so that drain hose is
no more than 10 feet in length for proper drainage.
Installation Preparation
Cabinets
24"
Square
Min.
5"
4"
and
Plumb
6"
*24"
DISHWASHER MODELS
ZBD0710 SS, Stainless Steel
ZBD6880 SS, Stainless Steel
ZBD6800 BB, Black
ZBD6800 WW, White
ZBD6890 Requires a 3/4" custom panel and handle
ZBD0700 Requires a 3/4" custom panel and handle
WARNING
To reduce the risk of electric shock, fire,
or injury to persons, the installer must
ensure that the dishwasher is completely
enclosed at the time of installation.
34"
Adjustable
to 35"
24"
Figure A
4
Figure B
Countertop
Dishwasher
28-3/8"
Clearance for Door
Opening 2" Minimum
CLEARANCES: When installed
into a corner, allow 2" min.
clearance between dishwasher
and adjacent cabinet, wall or
other appliances. Allow 28-3/8"
min. clearance from the front of
the dishwasher for door
opening (Figure B).

Advertisement

Table of Contents
loading

Table of Contents