Eco Engineering Easypell Operating Manual page 33

10 User controls and their function
On completion of the ignition process (can last up
to 15 minutes), the symbol for heating at full power
appears. The boiler is now heating at full power.
Display of the current boiler temperature
Setting the time programm of heating circuit 1.
By pressing the start and stoptime appear.
Activate the times with
During the activated time, the boiler always runs
up to the switch-off temperature without consider-
ing the Z26 contact. Outside the time, contact Z26
activates the boiler.
Setting the time programm of heating circuit 2.
By pressing the start and stoptime appear.
Activate the times with
During the activated time, the boiler always runs
up to the switch-off temperature without consider-
ing the Z27 contact. Outside the time, contact Z27
activates the boiler.
33
Operating Manual