Table of Contents
Advertisement
12
6
Fuel
Wood pellets are natural wood (dried sawdust or waste from machining) that has
been formed into pellets under high pressure. They have a very low moisture content
and very high calorific value.
Manufacture of wood pellets is regulated by European standard EN ISO 17225–2.
6.1
NOTICE
The heating system is suitable only for pellets of natural wood that comply with
standard EN ISO 17225–2 class A1 with a diameter of 6mm.
Using non-pelletised fuels or pellets that are not manufactured fromnatural woodwill
lead to the warranty becoming void andwill cause damage to the pellet boiler and the
chimney.
Use only quality pellets from Austrian standard approved, DINplus or ENplus
approved manufacturers.
Check the level of the pellet container regularly, at least every 2 days, and fill it. Please
observe the safe and proper closing of the container after filling.
Operating Manual
Specification for high quality pellets as per EN ISO
17225–2, class A1
Calorific value
Loose density
Water content
Ash content
Length
Diameter
Fine material
Contents
≥ 4,6 kWh/kg or ≥ 16,5 MJ/kg
min. 600 kg/m³
max. 10 %
max. 0.7%
max. 40 mm
6 mm
max. 1 %
100 % natural wood
6 Fuel
Advertisement
Table of Contents
