Prerequisites For Installing A Pellet Boiler; Central Heating Room - Eco Engineering Easypell Operating Manual

Hide thumbs Also See for Easypell:
Table of Contents

Advertisement

10
5

Prerequisites for installing a pellet boiler

You must fulfill the following conditions before operating a fully automatic pellet
boiler.
5.1
The pellet boiler is installed in the central heating room.
1.
2.
3.
4. Damage due to frost and humid air
5.
6.
7.
Operating Manual

Central heating room

Safety instructions for the heating room
DANGER
Risk of fire
Do not store flammable materials or liquids in the vicinity of the pellet boiler. Do
not permit unauthorised persons to enter the central heating room - children are
to be kept out. Always close the boiler door.
Air supply and ventilation of central heating room
The central heating room must be fitted with air supply and ventilation openings
(at least 200cm2). Legislation in your country must be observed.
Combustion air supply
The pellet boiler needs a supply of combustion air.
Never operate the pellet boiler if the air intake openings are partially or com-
pletely closed.
Contaminated combustion air can cause damage to the pellet boiler. Never store
of use cleaning detergents containing chlorine, nitrobenzene or halogen in the
room where the heating system is installed, if combustion air is drawn directly
from the room.
Do not hang out washing in the central heating room.
Prevent dust from collecting at the combustion air intake to the pellet boiler.
The central heating room must be frost-proof to ensure trouble-free operation of
the heating system. The temperature of the central heating room must not fall
below –3°C and must not exceed +30°C. The air humidity in the central heating
room must not exceed 70%.
Danger for animals
Make sure that household pets and other small animals cannot enter the central
heating room. Fit mesh over any openings.
Flooding
If there is a risk of flooding, switch off the pellet boiler in good time and discon-
nect from the power supply before water enters the central heating room. You
must have all components that come into contact with water replaced, before
you start up the pellet boiler again.
Cleaning
Clean the flue gas tube and chimney regularly.
5 Prerequisites for installing a pellet boiler

Advertisement

Table of Contents
loading

Table of Contents