Download Print this page
Irenis BLANKOM ADE-264(B) Manual

Irenis BLANKOM ADE-264(B) Manual

Encoder & iptv streamer with hdmi+cvbs input
Hide thumbs Also See for BLANKOM ADE-264(B):

Advertisement

Quick Links

Encoder & IPTV Streamer with HDMI+CVBS Input
h.264 compatible encoder & IP streamer combined
 HDMI- and CVBS (FBAS) compatible input for encoding
 Stereo Audio embedded (HDMI) or external Stereo Input
(3.5mm Stereo-Jack)
 CVBS: PAL/NTSC SD and
HDMI: HD Resolution 1080p, 1080i, 720p and lower
 IP output: RTSP, RTMPs, UDP/RTP, HTTP, HLS, FLV
 Distribution of Video Camera HD-SDI and other sources
content over LAN, WAN or internet
 4 simultaneusly and independent Live stream broadcast
encoder engines to multiple destinations
 Video-over IP applications
 IPTV/OTT applications
 Video conferencing, Camera streaming, INFO-Channels
 IPTV on LAN applications, Corporate IPTV for Broadcasters
 HD and SD video encoding (incl. 1080p)
 Corresponding products: M15 & 6800+ SetTopBox, HDD-
275 decoder for digital signage
 Available as ADE-1264 in 1RU 19'' Version up to 16 in 3RU
BLANKOM ADE-264B HDMI and CVBS compatible
encoders serving the distribution of SD and HD TV/video
content through IP networks in digital quality.
The live video can be received by Internet media server
by TV sets, with IPTV Set-Top Boxes,
with PC's and Tablets/Smartphones using i.e. VLC Player
info@blankom.de
BLANKOM ADE-264
IPTV encoder designed for TV
signal distribution in
excellent quality over LAN
and INTERNET.
The H.264 (AVC) compatible
compression technology
features low bit rates for
IPTV/OTT systems. The high-
efficient encoding chips saves
bandwidth cost through all
its resolution range.
Distribution of SD and HD TV
channels through the
IPTV/OTT network using
state-of-art IP technology
from almost any kind of
video input.
Excellent Video and Audio
quality.
High reliability.
No regular service and
maintenance need during
operation.
Available also as HDE-264
with only HDMI input
support.
- 1 -
ADE-264(B)
www.blankom.de

Advertisement

loading
Need help?

Need help?

Do you have a question about the BLANKOM ADE-264(B) and is the answer not in the manual?

Questions and answers

Summary of Contents for Irenis BLANKOM ADE-264(B)

  • Page 1 ADE-264(B) Encoder & IPTV Streamer with HDMI+CVBS Input h.264 compatible encoder & IP streamer combined BLANKOM ADE-264  HDMI- and CVBS (FBAS) compatible input for encoding IPTV encoder designed for TV  Stereo Audio embedded (HDMI) or external Stereo Input signal distribution in excellent quality over LAN (3.5mm Stereo-Jack)
  • Page 2 Function H.264 compatible Encoder and IP Streamer INPUT HDMI-Cable compatible (1.4) or Cinch for CVBS (BNC-Cinch-Adapter supplied) Resolution 1080p, 1080i, 720p and below (HDMI IN), PAL, NTSC SD IN 576i and below Video encoder H.264 (AVC) compatible, 1x Main + 1x second (HDMI) 2x CVBS encoders Audio encoder AAC +/++, MP3, MPEG1Layer2, AC-3 (External analog stereo Input depending on Model) Audio Bit-rate:...
  • Page 3 All technical data are subject to change w/o further notice ..© Irenis GmbH 11-2022........- 3 -...
  • Page 4 Appearance: DC-Jack 12V, AUDIO 3.5mm Input, Status LEDs, HDMI IN, RESET Button-hole, CVBS/FBAS BNC, RJ-45 GbEthernet Variant with SDI Inputs: SDE-265 (no 264 available any more) SDI-Versions have a loop through to cascade the Input to other SDI-devices... Sticker with default settings (MAC may be different) ADE-16264 in 3RU 19’’...
  • Page 5 If you use a Windows based PC, you should assign its ethernet adapter into the same range like the encoder: Use a static IP like follows: 1st: Open your network settings in System Menu:  All technical data are subject to change w/o further notice ..© Irenis GmbH 11-2022........- 5 -...
  • Page 6  -> Maybe confirm Administrator access-> Change IPv4 settings: - 6 -...
  • Page 7 Depending on browser you’ll get a log-in-screen window: Enter the default username = admin, default password = admin ..and here we go: All technical data are subject to change w/o further notice ..© Irenis GmbH 11-2022........- 7 -...
  • Page 8 and second CVBS2 as well ... The STATUS page shows your Setup encodings for all the MAIN and the Substream(s). Parallel and different streamings can be used for all encoder parts as long as the capacity of the system is not claiming it: You will get a message if the encoding capacity will be reached and one or more substreams would be disabled...
  • Page 9 Receivers are stupid and might not react to the changed values by themself. Depending on Model: Preview in Browser is possible from within the status page as a link: All technical data are subject to change w/o further notice ..© Irenis GmbH 11-2022........- 9 -...
  • Page 10 HINT: Adobe Flash does not work with HEVC h.265 codec!!!! You need to have h.264 encoding to be set in the main or sub-stream menu (model depending). CVBS-Preview with connected DVD-Player: Since last year, Adope and also Microsoft disabled the FLASH support in all OS. Therefore we changed the internal Preview Player to HTML5 Mode only: - 10 -...
  • Page 11 The device time can be adjusted by the Network-setup-part NTP-Server which you need to tell the NTP server URI and UTC-time difference. UK = ‘0’, Germany normal is UTC+1... All technical data are subject to change w/o further notice ..© Irenis GmbH 11-2022........- 11 -...
  • Page 12 If you press (Sync Time To Device) it will be updated. To also check your encoding streams you can copy the URI from the STATUS page: Mark it by the mouse and COPY it - Than insert into VLC: Note: If you more than one Network-Card in operation (like WIFI and GbE) in your receiving machine, VLC often doesn’t recognize where to catch it from.
  • Page 13 AGAIN: You do not need to restart the encoder only the receivers you have in your network need to re-sync to the changed values!!! Multicasts: All technical data are subject to change w/o further notice ..© Irenis GmbH 11-2022........- 13 -...
  • Page 14 copy with right mouse click udp://@238.0.0.1:1234 and insert into VLC: Do not wonder, this HDMIO –signal was downscaled by the Receiver-HDMI out to max FullHD ;-) - 14 -...
  • Page 15 If you change it to DHCP – after a reboot it will catch it from your router. Disadvantage: You need to check the to the encoder given IP Address by your router in it’s own menu or use an IP-Scanner-tool. All technical data are subject to change w/o further notice ..© Irenis GmbH 11-2022........- 15 -...
  • Page 16 We assume, that you are familiar with the basic settings of a network. These are the basic ports for HTTP and RTSP-Streaming use. You can modify that but we recommend to keep them as they are because RTSP – receivers might are fixed to that port while HTTP isn’t.
  • Page 17: On Screen Display

    It supports BMP with a special backgroud colour if you like to be that transparent – or simply use already transparent PNG files. Names and limitations of size are shown in the web. All technical data are subject to change w/o further notice ..© Irenis GmbH 11-2022........- 17 -...
  • Page 18 Audio settings are common for both stream encoder parts: Self-explaining: - 18 -...
  • Page 19 Quick-Start-Manual The default settings are usually Ok for most use-cases: All technical data are subject to change w/o further notice ..© Irenis GmbH 11-2022........- 19 -...
  • Page 20 Playing with ‘Deinterlaced settings’ helps sometimes fixing moving picture artefacts. BOTTOM only can solve right-left-camery stucking problems. SAR can adjust your Egg-Head picture into the right format – usefull for CVBS as well. A schedules ‘restart’ can be programmed (NTP-Time = ON recommended): The settings as well as the Firmware can be back-upped and re-uploaded.
  • Page 21 -> Will receive the stream. This works only with Multicast UDP / RTP ! MJPG Support: Setting the encoder main or secondary processor to All technical data are subject to change w/o further notice ..© Irenis GmbH 11-2022........- 21 -...
  • Page 22 Enables at the Status-Page the direct Links for Motion JPEG transmission direct into your browser (if that supports it): Just click: (here;-): - 22 -...
  • Page 23 Finally: To get more information about the deeper details of the encoder settings and configuration issues, please download the combined PDF – Manual from our website www.blankom.de. All technical data are subject to change w/o further notice ..© Irenis GmbH 11-2022........- 23 -...