Automatic Chain-Off Thread Cutting - JUKI AKANE MO-3000QVP Instruction Manual

Adjustments and settings
Automatic chain-off
thread cutter sensor
❷
Automatic chain-off
thread cutting length
ⓐ
❶
❶
❷
❻
❹

Automatic chain-off thread cutting

When the automatic chain-off thread cutting function is
enabled, the material end is detected at the end of sewing
and chain-off thread is automatically cut to the set length.
* If the material is present on the sensor, the chain-off
thread cutter will not operate.
* Note that the automatic chain-off thread cutting function
may fail to work well depending on the material used
(such as a transparent material).
In such a case, place the automatic chain-off thread
cutting function in OFF and press the chain-off thread
cutting button manually.
* As long as the sensor recognizes the material,
displayed on the LCD screen.
■ Setting the automatic chain-off thread cutting
function
1. Press automatic chain-off thread cutting changeover
button ❶ .
2. When the automatic chain-off thread cutting function is
set, ❷ is displayed on the sewing screen (parameter
display).
3. If you want to disable the automatic chain-off thread
cutting function, press automatic chain-off thread cut-
ting changeover button ❶ again.
■ Setting the length of chain-off thread
It is possible to set the chain-off thread length to be cut
automatically.
1. Press edit button ❶ .
2. Press right button ❷ to select the item (second from
❸
the left) corresponding to the automatic chain-off
thread cutting length.
3. Press enter button ❸ .
4. Press right or left button ❹ to determine the chain-off
thread cutting length.
5. Press enter button ❺ .
6. Press edit button ❻ .
❺
ⓐ
is
22