Error Display - JUKI AKANE MO-3000QVP Instruction Manual

Error display

Display Description of error
When you have depressed the
controller while the presser foot is
left in its upper position.
When the chain-off thread cutter
has failed to return to its home po-
sition and stopped.
When some object is caught in
the path of the chain-off thread
cutter and the cutter is unable to
cut chain-off thread.
When you have tried to cut chain-
off thread with the material placed
on the path of the chain-off thread
cutter.
When an excessive load is ap-
plied to the motor.
(In such a case that the controller
is held depressed for five minutes
or more)
When you have depressed the
controller with the cloth plate left
opened.
When the motor has locked up.
When the sewing machine mal-
functions.
Corrective measure
Lower the presser foot.
Remove any objects caught in the path of the chain-
off thread cutter, if any, and press the chain-off thread
cutting button.
If the error persists after you have taken the aforemen-
tioned corrective measure, consult the distributor where
you have purchased your sewing machine.
Remove the object that is caught in the path of the
chain-off thread cutter.
Remove the material.
Wait for three seconds. Then, the screen will return to
the previous screen.
Close the cloth plate.
Wait for three seconds. Then, the screen will return to
the previous screen.
Consult the distributor where you have purchased your
sewing machine.
42