Turn Answering System On Or Off; Message Alert Tone; Call Screening - AT&T CL84115 Quick Start Manual

Answering system

Turn answering system on or off

The answering system must be turned on to answer and record messages.
Using a cordless handset:
1. -> or
-> Answer ON/OFF -> SELECT.
2. or
to choose On or Off-> SELECT.
3. or
When the answering system is on, the handset shows ANS ON.
Using the telephone base:
Press /ANS ON/OFF to turn the answering system on or off. If the answering
X
system is turned on, it announces, "Calls will be answered." If the answering
system is turned off, it announces, "Calls will not be answered."

Message alert tone

When this feature is on, and there is at least one new message, the telephone base
beeps every 10 seconds.
Using a cordless handset or the telephone base:
1. -> or
2. or -> Ans sys setup -> SELECT.
3. or -> Msg alert tone -> SELECT.
4. or to choose On or Off -> SELECT.

Call screening

Use this feature to choose whether incoming messages can be heard over at
telephone base when they are being recorded. If you turn call screening on, you
hear the incoming message at the telephone base. While monitoring an incoming
message, you can answer the call by pressing PHONE on the handset,
/SPEAKER or lifting the corded handset on the telephone
Using a cordless handset or the telephone base:
1. MENU -> or
2. or -> Ans sys setup -> SELECT.
to select Call screening.
3.
to choose On or Off -> SELECT.
4. or
-> Answering sys -> SELECT.
-> Answering sys -> SELECT.
-> Answering sys -> SELECT.
22
or pressing
base.