Review And Dial A Number In The Call Log; Delete A Caller Id Log Entry; Erase Missed Calls Indicator In The Call Log; Call Block - AT&T CL84115 Quick Start Manual

Caller ID

Review and dial a number in the call log

1. -> or
2. When the desired entry displays, press
to call. On the telephone base, lift the corded handset or press
call.

Delete a caller ID log entry

1. -> or
2. When your desired caller ID entry displays on the handset-> MUTE/DELETE on
the handset or X/DELETE on the telephone base.

Erase missed calls indicator in the call log

When you have missed calls, the screen shows XX Missed calls.
This is the total number of calls you have not yet reviewed in the call log.
To erase this missed call indicator, you can:
Scroll and review the call log one by one, or
X
Press and hold
X
base when it is not in use.

Call block

If you have subscribed to caller ID service, then you can use the call block feature
to reject certain calls automatically. The call block list stores up to 20 entries. The
telephone system can reject calls automatically according to:
Numbers saved into the call block list
X
Incoming calls without numbers
X
This feature is only available on the cordless handset.

Add a call block entry

MENU ->
1. or
2. SELECT again to choose
-> Add new entry -> SELECT.
3. or
4. Enter a telephone number up to 30 digits -> SELECT.
5. Enter a name up to 15 characters -> SELECT
to scroll through the list.
to scroll through the list.
-> Call block -> SELECT.
Block list.
or
on the handset or CANCEL on the telephhone
to save.
19
/SPEAKER on the handset
/SPEAKER to