Summary of Contents for Hall Technologies LYNX Series
Page 1
Hall Technologies • 1234 Lakeshore Dr Suite #150 Coppell, TX 75019 • halltechav.com EX-LYNX Series HDMI Extender Set, 4K/60Hz, 60m USER MANUAL December 29, 2022 EX-LYNX-WPE-TX EX-LYNX-WP-TX EX-LYNX -TX EX-LYNX-RX Hall Technologies December 29, 2022 Page 1 of 18...
Page 2
8. Protect the power cord from being walked on or pinched particularly at plugs. 9. Only use attachments / accessories specified by the manufacturer. Refer all servicing to qualified service personnel. Hall Technologies December 29, 2022 Page 2 of 18...
Introduction OVERVIEW The LYNX Series features extension of Ultra HD resolution, 4K2K@60Hz video signals with audio and control up to 60m (197ft) over a single category cable. Both the LYNX-TX and the LYNX-RX include local audio de-embedding via a 3.5mm stereo output. The LYNX-TX transmitter includes an HDMI Local Loop output to allow for monitoring and playback status of the local video source.
1x IR Blaster cable 1x IR Receiver cable EX-LYNX-RX 1x Receiver unit 1x IR Blaster cable 1x IR Receiver cable 1x Mounting bracket 1x Power adapter Hall Technologies December 29, 2022 Page 5 of 18...
LED will illuminate when device is powered up LINK LED will illuminate when the link to the EX-LYNX-RX is connected EDID Sets EDID information (see dipswitch settings in the connections diagram). SERVICE Used to update the firmware. Hall Technologies December 29, 2022 Page 7 of 18...
LYNX-RX is typically locally powered and includes the needed power supply. LED will illuminate when device is powered up LINK LED will illuminate when the link to the EX-LYNX-RX is connected SERVICE Used to update the firmware. Hall Technologies December 29, 2022 Page 8 of 18...
RJ45 output port for connection to the RJ45 input port on a cascading EX-LYNX-RX CAT OUT (up to 8 can be cascaded) UPDATE Used to update the firmware. EDID Sets EDID information (see dipswitch settings in the connections diagram). Hall Technologies December 29, 2022 Page 9 of 18...
Note: In this application the EX-LYNX-RX is locally powered and providing power via PoC (Power over Cable) to the EX-LYNX-TX. Only one side needs to be powered, meaning the local power supply could be moved to the EX-LYNX-TX if that is more convenient for installation. Hall Technologies December 29, 2022 Page 11 of 18...
Note: In this application each EX-LYNX-RX needs to be locally powered, and the first EX-LYNX-RX provides power via PoC (Power over Cable) to the EX-LYNX-TX. Note: The pass-through control works only on the transmitter to the first receiver. Hall Technologies December 29, 2022 Page 12 of 18...
7. Select the firmware file “xxxxx.bin” then click Open. 8. The upgrade progress bar will show the status of the upgrade. 9. A pop-up window saying “Programming Completed Successfully” when complete. Hall Technologies December 29, 2022 Page 14 of 18...
Confirm the distance between each receiver does not exceed receivers do no specifications (depending on the desired resolution) Confirm the input on the display is correctly selected Hall Technologies December 29, 2022 Page 15 of 18...
Service 1x Micro USB Power 1x DC 12V/1A (not included) 180mm W x 75mm D x 25mm H Dimensions (7.087” W x 2.953” D x 0.984” H) Weight 295g (0.65 lbs.) Hall Technologies December 29, 2022 Page 16 of 18...
Page 17
(7.087” W x 2.953” D x 0.984” H) Weight 295g (0.65 lbs.) General Operating Temperature 0°C to 40°C (32°F to 104°F) Storage Temperature -20°C to 60°C (-4°F to 140°F) Humidity 20% to 90%, non-condensing Power Consumption 2.5W Hall Technologies December 29, 2022 Page 17 of 18...